top of page
  • info6435089

The steps you need to know for proper solar Panel installation

Updated: Nov 1, 2022

House with solar panel installed

Solar energy is one of the most promising sources of energy for the future. Not only is it environmentally friendly, but solar panels also provide an average annual return on investment of around 12%. Now that you know all of this, you may be wondering what’s involved in getting the installed. If so, read on for the steps you need to take to make sure your solar installation goes as planned. From understanding your eligibility to choosing a qualified installer, these are the steps you need to know if you want to go solar.

How to choose the correct solar Panel

When you are considering whether or not to install panels, there are a few key things to keep in mind. First and foremost, the size of your roof will affect the size of the system you need. Secondly, the type of panel system you need will also depend on your location and climate. Thirdly, make sure you have a good understanding of what kind of energy production your solar system will provide. Finally, be sure to get quotes from multiple contractors so you can get the best possible deal on your project.

To choose the right size for your panel system, start by measuring the width and length of your roof using a tape measure. Next, use this information to calculate how much wattage (or electricity) a particular size panel will generate based on the average sunlight in your region. Finally, choose a panel size that is equal to or greater than the wattage required by your specific roof layout.

For systems in warmer climates, it is often beneficial to install two or smaller panels instead of one large panel. This increases efficiency due to increased light capture at each individual module and reduces heat gain from neighboring modules during summer months. In colder climates where larger panels would be impractical due to snow load or wind exposure, supplemental heating may be necessary with larger arrays in order to maintain comfortable indoor temperatures during winter months.

Once you have chosen a solar system size, it is important to choose an installation type that matches your climate and roofing material

How to read and understand your solar panels' warranties

There are a few things you should know before taking on the task of installing your panels. First and foremost, make sure to read and understand the warranties that come with your new system.

Understanding your warranty means being familiar with the terms, conditions, and exclusions that apply to it. You also need to be aware of any paperwork or other materials you need in order to claim a warranty. Finally, review the installation procedures that were followed during your system’s installation in order to identify any potential problems or issues.

If something goes wrong with your solar system, don’t hesitate to contact the installer or manufacturer for help resolving the issue. By following these simple steps, you can have a smooth experience when installing your own panel system and maximize its potential for energy savings.

The different types of solar panels

There are a few different types of solar panels that you can choose from when installing your own solar power system. Here’s a breakdown of the main types:

• Monocrystalline: These panels are made from a single, large crystal of silicon. They produce high-efficiency energy output, but they’re more expensive than other types of panels.

• Polycrystalline: These panels are made from many small crystals of silicon. This lowers the cost per watt, but it also means that these panels produce less efficient energy.

• Thin-film: With thin-film technology, solar cells are printed onto thin film sheets that are then attached to an outer surface. This makes them cheaper to produce than other types of solar cells, but they may not generate as much power as other types of panels.

The installation process of solar panels

  • If you are looking to install solar on your roof, there are a few things you need to know beforehand. The installation process can be a bit daunting if you don’t have any experience, so we’ve put together a comprehensive guide on how to go about it.

  • First and foremost, you will need some sort of roof access. This can either be through an existing hole in the roof or if your home doesn’t have one, you will need to get a permit from the municipality. Once you have access, the next step is to measure the area where the panels will be installed. You will also want to make sure that there is enough space between the panels and any obstructions such as trees or power lines.

  • Next, you will need to prepare your roof for installation by cleaning it and removing any debris or flocks of birds. Then, use a tarp or piece of wood to lay out the panel area and draw a rough outline of it using spray paint or pencil. Using this template will help ensure accuracy when installing the panels later on.

  • Nowadays, most installations happen using mounts called racking systems. Racking systems allow for quick and easy installation without having to remove shingles or tear down walls.

To install a racking system follow these:

1. first, find out what type of mounting system your panels require – U-bolts, L-brackets, or simply screws – and purchase the necessary parts.

2. Once you have the mounting system, attach it to the roof using U-bolts or L-brackets and then install the solar onto the brackets.

  • Finally, connect the power supply to your solar panels and test them to make sure they are working correctly.

Overall, the installation process is relatively straightforward and can be done by anyone with a bit of experience.

How to maintain your solar panels

Proper installation of solar panels is critical to their longevity and performance. Here are a few key steps you need to know for proper installation:

  • Clean the surface of the panel before installation. Remove any dirt, dust, or oils that may have accumulated on the surface over time.

  • Measure and mark the location of the panels on your roof using a level or surveyor’s tape measure. Use the dimensions provided by your installer to ensure accurate alignment of the panels during installation.

  • Fix the brackets to your roof using screws, nails, or hot glue guns. Make sure that the panels are securely attached to the brackets so they do not move during strong winds or heavy rainstorms.

  • Align and tighten all screws, bolts, and fasteners until they are tight but do not overtighten them as this can damage the panel surface or bracket assembly. Pay close attention to instructions provided by your installer with regard to tightening torques and lengths of screws/bolts/fasteners for each type of bracket/panel configuration.


After reading this article, you should now have a good understanding of the steps involved in solar panel installation. Although the process may seem daunting at first, it is actually quite simple once you know what to do. With a little bit of planning and patience, you can successfully install your own panels and start reaping the many benefits they have to offer.

3 views0 comments


bottom of page